PART 1 GENERAL
1.01 SECTION INCLUDES
A. Vandal Proof ADA compliant tactile signage.
B. Interior injection molded high impact styrene frames.
C. Plastic sign inserts.
D. Tool for changing signs.
1.02 RELATED SECTIONS
A. Section 06200 - Finish Carpentry: For installation materials and sign installation.
A. Title III
of the "Americans with Disabilities Act of 1990", (
B. "American National Standard for Buildings and Facilities" CABO/ANSI A117.1-1992, Council of American Building Officials/American National Standards Institute.
C. The Uniform Building Code, as adopted by the State of _________________.
A. Submit the following in accordance with Section 01300:
1. Product Data: Manufacturer's material description and fabrication methods.
2. Shop Drawings
3. Samples: One full size sign including frame and insert in colors specified and graphics scheduled.
1.05 QUALITY ASSURANCE
A. Manufacturer's Qualifications:
1. Company with not less than 5 successive years experience in the manufacture of interior building signs. Bidder must perform the actual manufacturing and cannot subcontract the job out to another manufacturer.
2. Furnish a list of at least 3 signage projects completed in the previous 2 years.
1.06 DELIVERY, STORAGE AND HANDLING
A. Deliver signs to the project site (or requested destination). Signs must be boxed and have
protective wrap to prevent damage during delivery and storage. Store signs in dry area
protected from the elements.
PART 2 PRODUCTS
A. Standard of Quality: 4Sign Solutions manufacturing process is the ¡°Standard of Quality¡± for everything except Braille dots; manufacturers licensed to use this process need not obtain substitution approval prior to bid, but must furnish a letter certifying that they are providing New Hermes, Inc. patented products.
B. Acceptable Fabricators: Subject to compliance with requirements, acceptable fabricators and products are:
1. Sign Solutions (1800-333-2927)
2. Best Manufacturing (1800-235-2378)
3. ASI Sign Systems
4. Andco Industries
5. Spanjer Brothers
6. Or Equivilent
C. All other manufacturers/fabricators seeking approval of their products must comply with requirements of the Instructions to Bidders (AIA Document A701, Paragraph 3.3) prior to bidding. Substitutions of materials or method of manufacture allowed without prior approval from sign consultant and client.
2.02 SIGN SYSTEM
A. Modular Sign Frame System: Injection molded high impact styrene frames.
B. 1-ply modified Gravo-Tac¢ç acrylic sign inserts.
C. Insert Tool: Clear flexible vinyl suction cup.
A. Frame Design: Fabricated with 2 reveals; rear reveal for projected appearance, front reveal for recessed appearance. Frames feature holes modularly placed to accommodate snaplocks attached with adhesive to insert panels for positioning multiple inserts. Pre-grooved back reveal to ensure tape concealment and molded holes to accommodate standard hardware for various types of wall installation.
1. Frame Shapes and Sizes: Refer to project sign schedule for specific information on frame shape, size and corner style.
2. Frame Colors: Refer to project sign schedule for specific information on colors.
3. Frame Variations: Refer to project sign schedule for specific information on frame variations.
a. Half Rounds may be used as headers or may be joined together to form circular signs.
b. Frames may be joined back-to-back for mounting perpendicular to walls and ceilings (requires special mounting fixture).
a. APPLIED: Acrylic 1-ply 2-piece construction modified acrylic sign
material consisting of 1-ply, 1/16 inch substrate and 1-ply, 1/32 inch profile material to create tactile copy and graphics.
b. INLAY: Gravo-Tac¢ç1-ply, 3-piece construction, modified acrylic sign material consisting of two 1-ply 1/32 inch thick acrylic (same color) bonded together, with 1/16 inch profile material to create tactile copy and graphics.
c. Supply guarantee for profile and Braille abuse of 5 years
(SPECIFIER¡¯S NOTE: The inlay method is recommended for high abuse or vandal prone areas. Contact the manufacturer for special pricing information.)
and Colors: acrylic, matte finish,
(SPECIFIER¡¯S NOTE: acrylic materials meet
Type: RLS System using acrylic
computer engineered, adhesive-backed, raised graphics, complying with
b. Pictograms: All ¡°symbols¡± must match as closely as possible the published ¡°international¡± symbols. Other interpretations will not be deemed acceptable. All symbols must be approved prior to fabrication.
c. Braille: Use drill and press-fit method for placing Braille dots on architectural signs; computer engineered, using special carbide engraving bit, press-fit tool with vacuum pump, and UV stable acrylic Rasters¢ç.
1) Character and Number Height: 5/8 inch minimum, 2 inch maximum, except when otherwise needed to meet requirements of ADA Section 4.30.3.
2) Character and Number Depth: Raised 1/32 inch.
3) Copy Style: Upper case, sans serif.
4) Braille: Grade 2 (conforming to Specifications #800, National Library Service, Library of Congress), rounded or domed, 0.019 inch to 0.025 inch high, to allow smooth tactile sweep of the fingers, from left to right. Braille dots should be of uniform depth. Background surface to be smooth without ridges or other intrusions that will interfere with the ability to read the dots. Raised elements, such as borders, shall be separated a minimum of 3/8 inch from the Braille dot cell groups. This clearance dimension is to be applied to the depression caused by a routed, or similar Braille fabrication system, to the distance of the border to tactile characters, or from dots to tactile characters in an acrylic dot type system. A clear cell may be inserted at the beginning and end of a row to set the left and right border spacing in lieu of 3/8 inch. Maintain one of the following configurations for dot/cell measurement:
Dot to Dot 0.092 inch 0.090 inch 0.100 inch
Cell to Cell 0.245 inch 0.241 inch 0.300 inch
Row to Row 0.40 inch 0.395 inch ---
5) Braille Message: All messages to be lower case, and may not directly reflect the style of the tactile letters.
6) The Braille area is to be located below the corresponding tactile text. On directional signs displaying more than one directive, braille should be placed below each directive. On signs other than directional signs, if the tactile print message is multi-lined and expresses a phrase, the entire Braille text should be grouped together below the print message.
7) In alpha/numeric format, if tactile print reads A324B, in braille, text should be written: / capital sign/letter/number sign/numerals/letter sign/capital sign/letter. Do not use double capital sign /dot 6/dot 6/.
8) If tactile message is: ¬ (arrow)
In braille, text should be written: /¡±ar¡±/r/¡±ow¡±/space/l/e/f/t/.
4. Engraving Process: Tactile signage shall be profile engraved in accordance with
the manufacturer¡¯s instructions.
a. Inlay Method: After 2-ply substrate has been bonded together and cut to size, cut inline text/graphics through top ply and weed immediately. Cut outline text/graphics from the 1/16 inch profile material and adhere text/graphics to the substrate with Gravo-Bond.
5. Sign Insert/Snaplock Mechanism: Tamper resistant positive locking snaplock, adhesively applied to sign insert and designed to engage holes in frame and provide modular flexibility and ease of sign changeover.
a. Sign inserts are easily removed by suction cup. Verify quantity to be furnished with each sign order.
6. Copy Window Signs: Manufacture by attaching front piece of 1/32 inch color acrylic material with adhesive to one piece of 1/32 inch clear acrylic material with no adhesive. Assemble inside frame for alignment purposes. Cut a rectangular window out of the front piece and weed out. Apply the profile material and engrave copy/graphics. Then apply strips of 1/32 inch double-sided adhesive tape 1/8 inch away from the top and bottom of the window opening as well as at other areas on the sign deemed necessary to adhere the front piece to the color back piece. Paper insert nameplate should move smoothly when assembled.
a. Manufacturer will supply owner with computer software and sample layouts for paper insert nameplates for copy window signs upon request.
2.04 SOURCE QUALITY CONTROL
A. PROOFREADING: Vendors may to obtain independent certification. Certified proofreaders may verify that the Braille is correct by review of the sign fabricators text proofs prior to fabrication, and/or, review of signs after fabrication. Proofreading will confirm that the braille segment is in accurate Grade 2 Braille that adheres to the guidelines and accurately reflects the intent of the communication for the braille reader. Any sign found to be in error is to be replaced and proofread at no cost to the owner.
1. All signs may be proofread by a certified braille reader licensed by the Library of Congress to read Grade 2 Braille.
PART 3 EXECUTION
A. Examine the substrates and conditions under which the work is to be performed, and notify the Contractor in writing of conditions detrimental to the proper and timely completion of the work. Do not proceed with the installation until unsatisfactory conditions have been corrected.
A. Mount sign
frames with double-coated acrylic, adhesive-backed foam tape, or with metal
screws, or other appropriate hardware suitable to the substrate to which the
frame will be mounted. Mounting
height to comply with
1. 40 inches from floor to centerline of sign for elementary schools
2. 60 inches from floor to centerline of sign for all other buildings.
B. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door. Where there is no wall space to the latch side of the door, signs shall be placed on the nearest adjacent wall. Mounting location for such signage shall be so that a person may approach within 3 inches of signage without encountering protruding objects or standing within the swing of the door.
A. Provide the following interior signs: (see attached schedule)
1. Type 1 - 8x8¡± room number 1¡± and ¨ú¡± room name
2. Type 1A – 8x8¡± room number 1¡± and ¨ú¡± room name w/1 insert
3. Type 2 - 8x8¡± restrooms 1¡± name
4. Type 3 - 8x8¡± stairs 1¡± copy
5. Type 4 - 12x12¡± evacuation map w/occupancy load
6. Type 5 - 12x18 or 18x12¡± handicap accessible directionals
7. Type 6 - 12x24¡± hanging directionals
8. Type 7 - 6x12¡± egress
END OF SECTION